Whole-Home Rewire in Arlington, TX
A whole-home rewire in Arlington replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation.
Typical whole-home rewire costs in Arlington: $5,216–$15,648
- Serving Arlington & Arlington & Surrounding Areas
- Licensed by State Contractor Licensing Board
- Free Estimates
- Response in <2 Hours
Whole-Home Rewire in Arlington, TX
A whole-home rewire in Arlington replaces all branch circuit wiring — typically from the panel to every outlet, switch, and fixture. This is necessary for homes with knob-and-tube wiring (pre-1950), early aluminum branch wiring (1965–1973), or severely degraded insulation. The work requires extensive permitting and multiple city inspections.
A licensed electrician pulls the permit and coordinates all inspections. Plan for your home to be partially without power for 3–7 days during the project.
Whole-home rewiring in Arlington costs $5,000–$20,000 depending on home size, access difficulty, and number of circuits. A 1,500 sq ft home typically runs $6,000–$12,000. This is one project where the cheapest quote is the most dangerous — verify your contractor's license and check references before signing.
All contractors in the Arlington network are licensed through State Contractor Licensing Board and carry full general liability and workers' compensation insurance. Permits are pulled through City of Arlington Development Services Department. Arlington experiences hail, hurricane, tropical storms and tornadoes — hiring a locally-experienced contractor is essential.
Signs You Need Whole-Home Rewire in Arlington, TX
Any of these indicators warrants a call to a licensed Arlington electrician. Electrical hazards are the leading cause of residential fires — don't delay.
- Home has original knob-and-tube wiring (pre-1940s) — no grounding, insulation deteriorates
- Home has aluminum branch circuit wiring (1965-1973 construction) — requires specific remediation
- Multiple rooms on the same circuit, frequent trips, or lights dimming when appliances run
- Insurance company has refused or surcharged due to outdated wiring type
- Flickering lights throughout the home not explained by a loose fixture
- Burning smell but no identifiable source
What Whole-Home Rewire Includes
Here's what a licensed Arlington electrician covers during a typical whole-home rewire appointment:
- Whole-home assessment and written scope of work with permit application
- Old wiring removal (knob-and-tube or aluminum branch circuit)
- New copper wiring installation to all circuits throughout the home
- Panel upgrade if needed (included in most full rewires)
- AFCI and GFCI protection on all circuits per current NEC code
- City inspection at multiple phases: rough-in, service change, final
- Drywall repair coordination (separate contractor typically)
- Final load test and inspection sign-off
Scope may vary by contractor. Ask your licensed electrician to confirm what's included before work begins.
How Whole-Home Rewire Works in Arlington
What to expect from a licensed Arlington electrician from first call to completion.
- 1
Scope & Permit
Full assessment of existing wiring type, panel, and circuit layout. Permit application submitted before any work begins.
- 2
Rough-In Wiring
New copper wiring is run to every outlet, switch, and fixture location. Old knob-and-tube or aluminum branch circuit wiring is removed. City rough-in inspection required before walls are closed.
- 3
Panel Work
New panel or panel upgrade is installed and all circuits are landed and labeled. Grounding and bonding brought up to current NEC code.
- 4
Device & Fixture Installation
Outlets, switches, AFCI/GFCI protection, and fixtures are installed. All tamper-resistant receptacles per code.
- 5
Final Inspection & Sign-Off
City inspector performs final inspection. All circuits are tested. Homeowner receives as-built circuit directory.
Whole-Home Rewire Cost in Arlington, TX
Electrical work in Arlington ranges from $200 to $8,000 depending on the job's complexity and scope. Whether you need outlet repairs, panel upgrades, or generator installation, local electricians price their work competitively while accounting for Arlington's growth and demand for licensed professionals.
| Service | Low | High |
|---|---|---|
| 1,000-1,500 sq ft home rewire | $8,000 | $15,000 |
| 1,500-2,500 sq ft home rewire | $12,000 | $22,000 |
| 2,500-4,000 sq ft home rewire | $20,000 | $35,000 |
| Knob-and-tube remediation only (partial) | $5,000 | $12,000 |
| Aluminum branch circuit remediation | $3,000 | $8,000 |
Pricing reflects Arlington, TX market rates. Actual cost may vary. Always get a written quote before work begins.
Frequently Asked Questions About Whole-Home Rewire in Arlington, TX
How much does an electrician cost in Arlington, TX?
Licensed electricians in Arlington charge $75–$150 per hour for service calls and labor. A simple outlet installation runs $150–$300, ceiling fan installation costs $200–$400, and electrical panel inspections range $150–$300. All pricing includes the required permit and inspection fees mandated by Arlington's building department. Get free quotes from ProvenQuote-verified electricians to compare estimates before hiring.
Do I need a permit to upgrade my electrical panel in Arlington?
Electrical panel upgrades always require a permit in Arlington, issued by the Arlington Building Standards Department. Your state electrical licensing board oversees all licensed electricians performing the work. Unpermitted electrical work voids your home's insurance, creates fire hazards, and triggers hefty fines during home sales or inspections. Licensed electricians in Arlington handle all permitting—never hire unlicensed workers for panel upgrades.
How much does a 200 amp panel upgrade cost in Arlington?
A 200 amp panel upgrade in Arlington costs $1,500–$3,500 installed, including the permit, inspection, and utility coordination with your local electric provider. The work addresses modern electrical demands from EV chargers, solar systems, and high-power appliances. You qualify for a 30% federal tax credit (up to $600) under the Inflation Reduction Act for panel upgrades. Get free quotes from licensed electricians in Arlington to confirm pricing.
How long does EV charger installation take?
Level 2 EV charger installation in Arlington takes 2–4 hours for a standard home setup. The work requires a permit from Arlington's building department and inspection before use. You qualify for a 30% federal tax credit (up to $1,000) under the Inflation Reduction Act through 2032. Check with Oncor, your local utility, for additional EV charger rebates. Licensed electricians in Arlington handle permitting and utility coordination.
What is aluminum wiring and is it dangerous?
Aluminum branch circuit wiring installed in homes built between 1965–1973 is a fire hazard per the U.S. Consumer Product Safety Commission. Aluminum expands and contracts, loosening connections and creating heat that ignites insulation. Arlington homes built during this era commonly have aluminum wiring. Remediation options include pigtailing copper wire to outlets or rewiring the entire home. Licensed electricians in Arlington can inspect and recommend safe solutions.
How do I know if my electrical panel needs to be replaced?
Replace your electrical panel in Arlington immediately if breakers trip repeatedly, you smell burning odors, your home has under 200 amps, or the panel is over 30–40 years old. Defective brands like Zinsco, Federal Pacific, and Pushmatic require replacement. A licensed electrician inspection costs $150–$300 and identifies whether upgrades are urgent. Get free quotes from ProvenQuote-verified electricians in Arlington for panel replacement estimates.
Are there rebates for electrical upgrades in Arlington, TX?
Arlington homeowners qualify for multiple electrical rebates and tax incentives. The Inflation Reduction Act provides a 30% federal tax credit (up to $1,000) for EV charger installation and 30% credit (up to $600) for panel upgrades through 2032. Check with Oncor for additional EV charger rebates. Low-to-moderate income households may qualify for HEEHRA assistance. Licensed electricians in Arlington help verify eligibility and submit paperwork for credits.
How do I find a licensed electrician in Arlington?
Licensed electricians in Texas are regulated by your state electrical licensing board and must display their license number. Verify licensure online before hiring. Look for state license, $1M+ liability insurance, workers' compensation coverage, and a clean permit history with Arlington's building department. ProvenQuote-verified electricians in Arlington meet all licensing requirements. Get free quotes from multiple local providers to compare experience, pricing, and customer reviews.
Other Electrical Services in Arlington, TX
For Electrical Professionals
Are you an electrical contractor serving Arlington?
ProvenQuote leases city markets exclusively to one contractor — every lead from this page, no sharing. Free to apply, no commitment.